Showing posts with label ISO-C1. Show all posts
Showing posts with label ISO-C1. Show all posts

Monday, September 24, 2018

Dyplast Products Revamps Blog with new Style and Content


New Style...Same Industry Expertise

Dyplast consistently challenges the insulation industry with thought provoking articles, consistent and accurate data; and our manufacturing capacities and precision quality control make us one of the industry’s finest suppliers of Mechanical Pipe Insulation and Composite Foam Cores!

Meet the Experts at Dyplast Products and Challenge Us

Dyplast Sales Staff are Insulation Industry Subject Matter Experts. Call us today and put them to work for you!



CLICK BELOW TO SEE EACH OF OUR PRODUCT LINES

ISO-C1 Polyiso                            ISO-HT Polyiso

                    Dyplast EPSD            Composite Foam CoresF


Contact one of our Staff Today!
(305) 921-0100
(800) 433-5551

Wednesday, August 29, 2018

Dyplast Products Releases - QWIK GUIDE: GeoFoam (Geo-Technical EPS)


Dyplast Products recently issued another a one-page Qwik Guide on Dyplast® EPS GeoFoam. What is Geofoam? It is a large expanded polystyrene (EPS) rigid foam block, typically used as a light-weight/high-strength structural replacement for soil in geo-technical projects as shown in our case study entitled GeoFoam Project: Sharpes Ferry Bridge or as structural alternatives in applications such as stadium seating and swimming pool foundations in Florida's high-rise hotels and residences.  Dyplast GeoFoam is approximately 1% of the weight of most sandy and/or average moisture soils, and is particularly advantageous in applications where proper soil alternatives. 

This Qwik Guide can be found on our web-site www.dyplast.com under the resources drop down.

Monday, July 30, 2018

Re-Launch: Dyplast CEO pens "Open Letter to the Mechanical Insulation Industry"


Dyplast sent out a media announcement yesterday and a minor “units error” in our attachment was identified by our friends. Dyplast herein restates its message (now with an updated attachment)  that Recently Dyplast was made aware of several marketing documents from Pittsburgh Corning comparing FOAMGLAS® to PIR/PUR systems. These include "Truth in Performance", "Polyisocyanurate Foam versus FOAMGLAS Insulation", and "FOAMGLAS Response to Dyplast Customer Bulletin dated 6/2010". These marketing pieces are misleading and contain numerous false statements. While Dyplast will not waste your time going through every misrepresentation, this letter will address key areas in order to let you decide if there is any reason to give credit to the Pittsburgh Corning claims. Additionally, Dyplast will outline key facts about Dyplast ISO-C1® products because real data and actual infield performance are a better basis to evaluate products.





Friday, June 22, 2018

Dyplast Receives 2018 Florida Sterling Manufacturing Business Excellence Award


ORLANDO - Dyplast Products received statewide recognition as a  2018 winner of the second annual Florida Sterling Manufacturing Business Excellence Award. The award, recognizing high performing manufacturers in six categories, was announced and presented June 1 at the Governor's Sterling Awards Banquet in Orlando.

The Florida Sterling Council and FloridaMakes collaborated on these statewide awards. Companies were judged on leadership, strategic planning, customer and market focus, measurement, analysis and knowledge management, workforce and operations.

Dyplast was selected from among 27 award finalists; 120 manufacturers were nominated. FloridaMakes will feature the finalists in webinars, plant tours and events that share best practices to benefit Florida's manufacturing sector and at the Make More Manufacturing Summit to be held on July 26 in Orlando.



Wednesday, May 16, 2018

Dyplast releases new Polyiso vs. XPS Technical Bulletin


Dyplast released its latest Technical Bulletin 0418 which is an update to the 0214 Bulletin on Polyiso versus XPS in low temperature pipe insulation applications. Whereas the previous version was focused primarily on examining the cost of insulation systems versus energy savings and long-term performance of polyisocyanurate (polyiso or PIR) and extruded polystyrene (XPS) insulants in refrigeration and chilled water applications, this more recent Bulletin revision is more-so focused on the misinformation and/or lack of full disclosure so prevalent in the marketplace. Dyplast aggressively advocates for:
  • honest presentation of physical properties and pertinent information, yet also
  • full-disclosure, complemented with
  • third-party verification and audit of physical properties and the quality process.

Monday, November 6, 2017

Dyplast Announces Additional ISO-C1® and ISO-CF® Fabrication Capabilities


Dyplast Products manufactures high-quality rigid polyisocyanurate insulation bunstock for mechanical insulation, sheet, and foam cores offering many superior properties.

Dyplast manufactures ISO-C1®, and ISO-CF® bunstock on a continuous production process yielding 2.0, 2.5, 3.0, 4.0, and 6.0 lb/ft3 densities. Today Dyplast announces that we have installed a SmartShop® CNC router to execute preformed routed cuts on our polyisocyanurate sheet and foam core family of products. Dyplast has extensive sheet fabrication capacity, and now has the capability to produce preformed routed cuts for prototypes and production pieces to respond to increasingly complex customer requirements. Our experienced staff can fabricate the large bunstock into sheets and shapes utilizing computer-aided-design (CAD). 

Dyplast's production capacities allow us to meet market demands for large or small volume projects.

Dyplast invites you to discuss your projects and needs. Please contact Dyplast's Sr. Account Managers at (800) 433-5551 or e-mail us at info@dyplast.com or via our web-sites.
"Leading Edge Technology for Insulation & Foam Cores"

Please visit Dyplast's web-sites 
.

Monday, October 30, 2017

Dyplast Announces Additional EPS Fabrication Capabilities



Dyplast Products manufactures high-quality rigid expanded polystyrene (EPS) foam blocks using a molding process at densities of 1.0, 1.25, 1.5, and 2.0 lb/ft3. Today we announce that we have completed installing additional fabrication capacity to better serve increased demand and to offer more options for complex customer requirements. Our experienced staff can fabricate the EPS blocks into sheets and shapes utilizing computer-aided-design (CAD).

Dyplast EPS insulation is light-weight and resilient, offering many unique properties. Dyplast's production capacities allow us to meet market demands for large or small volume projects.

Dyplast EPS invites you to discuss your projects and needs. Please contact Robert Sanchinel Dyplast's Sr. Account Manager at (800) 433-5551 or e-mail 
rsanchinel@dyplast.com


Please visit Dyplast's web-sites 

Monday, October 23, 2017

Dyplast releases new Foam Core website v.1



Dyplast Products, LLC  www.dyplast.com  has launched a new polyisocyanurate ISO-CF® Foam Core and sheet web-site  www.dyplastcomposites.com. The web-site has a clean design with stream lined navigation and readability. It can be viewed on desktops, laptops, as well as being mobile friendly.

The web-site includes technical information on Dyplast polyisocyanurate core and sheet foams: ISO-CF®, ISO-HT CF®, and the Dyplast® EPS family of products.  The Foam Cores includes all our technical data, Technical Bulletins, Qwik Guides, and application information. 

Dyplast has the fabrication capabilities including CAD to produce sheets or other custom shaped core pieces that can be used in process temperatures up to 350 °F (177 °C). The core foams have an application range from -297°F to 350 °F (-187.8 °C to 176.7 °C). 

The web-site features a link to our newly designed Dyplast Products, LLC website with specific information about our low temperature polyisocyanurate insulation for mechanical pipe insulation and other applications.  The Dyplast Products web-site also includes information on our Dyplast EPS family of products.

Dyplast invite you the fabricator, engineer, composite designer, and OEM end user to study the new Dyplast web-site to increase your knowledge of Dyplast’s foam cores.  

The new Foam Cores web-site will be formally launched at the CAMX 2017 in Orlando Florida on Tuesday December 12, 2017. Visit Dyplast personnel at Booth A44 for more information and technical discussion of your core needs. 


Please visit Dyplast's web-site www.dyplast.com

Thursday, October 19, 2017

Dyplast Products Redesigned Web-Site v.1


Dyplast Products, LLC  announces today that we have re-designed the Dyplast web-site, www.dyplast.com. The redesigned web-site has a cleaner design with stream lined navigation and readability. It can be viewed on desktops, laptops, as well as being mobile friendly.

The web-site still includes all the previous technical information about our family of products including our polyisocyanurate foams: ISO-C1®, ISO-HT®, and Dyplast® EPS.  The new information includes ISO-C1® 2.5# cryogenic test results meeting the international standard CINI-2013. Dyplast continually update the web-site

In addition to all our technical data, Technical Bulletins, Qwik Guides, and application information, Dyplast has added new sections with our published articles and blogs along with a revised Career page. The web-site features a link to our new Foam Cores web-site with specific information on our ISO-CF®.

Dyplast continues to provide "leading technology for low temperature insulation application and core foams".

Dyplast invites you the fabricator, installer, contractor, engineer, estimator, or end user to study the new Dyplast web-site whether you are a frequent user or a first-time user looking to increase your knowledge of insulation.   

Please visit Dyplast's web-site www.dyplast.com

Tuesday, September 12, 2017

Dyplast Reopens after Hurricane Irma


Dyplast and our employees very much appreciate the thoughts and prayers so many of you offered to us and indeed all in the path of Hurricane IRMA. All of our personnel are safe although a number still do not have electricity and water.
 
The Miami plant sustained minimal damage, and we appreciated the efforts that our staff made to be at the plant this morning. They came in spite of personal hardships.
 
Dyplast anticipates being operational on or before Friday September 15, 2017. We still have spotty telephone service at the site.
 
We further anticipate that we will be back to normal operations next week fulfilling all orders. If you had already placed orders before Dyplast suspended operations these shipments will have priority.
 
Thank you for your patience. Please contact your Account Manager if you cannot get through to Customer Service, and you can always contact me directly via my cell.

Joe Hughes
VP Sales and Marketing
Mobile: 305-904-4059
 

Tuesday, August 15, 2017

Dyplast's latest Customer Bulletin, 0717 - ISO-C1® Polyisocyanurate Insulation Flame Spread and Smoke Development



Dyplast's latest Customer Bulletin, 0717 - ISO-C1® Polyisocyanurate Insulation Flame Spread and Smoke Development, is another in a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products and on items that affect our industry.
Marketing literature for insulation products on the internet and in printed media often address the flame spread index (FSI) and smoke developed index (SDI) as measured in accordance with ASTM E84 or comparable standards. This updated (0909) Customer Bulletin provides factual, clarifying information concerning ISO-C1's FSI and SDI as well as other important points relating to the combustion properties of polyisocyanurate foam.

On May 30, 2017 Dyplast sent to our readership another related document, the reprint of the American Chemistry Council's Center for the Polyurethanes Industry, Question and Answer: Smoke Toxicity document. The document contains two sections, General Information on Smoke Toxicity followed by a section with Information Specific to Polyurethane Products. 

Click the link below for more information. 
For the past 8 years Dyplast has dedicated time and resources to producing Technical and Customer Bulletins in order to provide customers and potential customers information regarding a variety of timely topics that impact the insulation industry. The complete list can be accessed at...


Please visit Dyplast's web-site www.dyplast.com

Thursday, June 8, 2017

Dyplast Products receives Florida Sterling Manufacturing Business Excellence Award


On June 2, Dyplast Products, LLC received the “First Runner Up” award at Governor's Sterling Awards Banquet in Orlando. The Florida Governor’s Sterling Award is for Performance Excellence. The awards are presented annually by the Governor to both private and public companies that are high performing, role-model organizations demonstrating superior management approaches and role model results.

The finalist and winners were selected from among 28 award finalists representing 120 Florida manufacturers nominated in 6 categories. Dyplast received statewide recognition in the “up to 100 employees” category.

Dyplast personnel attending were:  Ted Berglund President and CEO, Vincente Fuster, Sr. VP Operations and Finance, and Yamilet Ramirez, Asst VP and HR Manager. Ted stated he was pleased with the award and congratulated the Dyplast team for their commitment to excellence.

Friday, June 2, 2017

Dyplast Products receives CSIA's Platinum Safety Award


Dyplast Products was presented with Central States Insulation Association's "Best Practices in Safety" Platinum award on the 3rd of May 2017 at the Belterra Casino in Florence, IN. Tom McGettigan was honored to accept this on behalf of the Dyplast Products' team.
 
The inaugural program award was presented to CSIA members who have demonstrated a commitment to continuously improve jobsite safety. 
 
Several years ago, Dyplast developed and implemented the "Be Safe, Stay Safe" program. Because of the company's continuing efforts, Dyplast has been recognized with numerous consecutive years awards by industry associations such as NIA and MICA. Dyplast is proud to be recognized by CSIA in their program's inaugural year. Safety remains an integral part of Dyplast's culture.

Monday, April 17, 2017

Dyplast awarded Manufacturer of the Year by South Florida Manufacturers Association



Dyplast was awarded the Manufacturer of the Year by the South Florida Manufacturers Association at the 38th Annual Recognition of Excellence Banquet dinner held on March 23rd at The JA World Huizenga Center at Broward College in Coconut Creek, Florida. Ted Berglund, Vincent Fuster, Ramon Betancourt and Yamilet Ramirez represented Dyplast at the event.



SFMA celebrates excellence in the manufacturing sector by recognizing both individuals and companies, who through a very demanding ranking process, demonstrate distinction in the categories of Employee of the Year and Manufacturer of the Year recipients. Dyplast was honored within its class (41 - 80 Employees) taking the winning spot of becoming the Best Manufacturer of the Year.  This recognition by the SFMA put Dyplast in the unique position of advancing to the state level competition - Florida Sterling Manufacturing Business Excellence (SMBE) where once again through a rigorous ranking process Dyplast will be evaluated and considered for an award.  The SMBE award ceremony will take place in Orlando in June.


Tuesday, April 4, 2017

Dyplast publishes new article, "Insulation Installation" in LNG magazine


The fifth Dyplast article published in LNG Industry magazine is entitled "Insulation Installation". Dyplast has devoted significant resources to producing and providing the insulation industry with in depth analysis and explanation of leading industry issues through its articles in LNG magazine. Previous Articles include...

Below is an exerpt of the new article..."Insulation Installation"

"Failures at a new LNG facility during the first few months of initial operations can be expensive and cause damage to a company's image. Therefore, most companies do everything possible to ensure a 'perfect start-up', but this is easier said than done. Identifying what may ultimately cause problems is a first step to controlling and eliminating those problems. Although it may be challenging to anticipate the main reasons for forced shutdowns or curtailments during the first months of operation, poor design and installation of the insulation system are clearly on the list.

While many of the principles that are discussed are applicable to any insulant, this article focuses on polyisocyanurate (polyiso) and cellular glass (cell glass), since there is more long-term experience with those insulants, with successful service, with no failures over periods of 20 years and more."

Click below to read full Article 

Please visit Dyplast's web-site www.dyplast.com for more information.

Thursday, March 23, 2017

Dyplast Selected as a Top Workplace

We were delighted to receive notification that the Sun Sentinel named Dyplast Products as a South Florida Top Workplace. Dyplast scored very high on the survey for the most-desired qualities and for creating a positive work environment. The South Florida companies chosen for recognition were selected through employee surveys conducted by Workplace Dynamics. The surveys measured such qualities as company leadership, communication, career growth, working environment, managerial skills, pay and benefits.

We are proud of our company's achievements. 

Tuesday, January 24, 2017

Dyplast new Article, “Commercial Quality Control: The Missing Link”, in LNG Industry Magazine


Dyplast Products has published its latest article in LNG Magazine titled “Commercial Quality Control: The Missing Link”. In an era with disparate pricing, a multiplicity of owners/stakeholders, long-term price volatility, multiple concurrent plant constructions, a shortage of skilled personnel, and increasingly complex technologies, owners/stakeholders in LNG projects increasingly face new risks.

This article introduces commercial quality control as an approach to move more impact factors to the controllable side of the ledger, and also as a way of better identifying and mitigating risks across the project lifecycle – beginning at project inception, but encompassing development, financing, construction and operations.

Click here to read full article 


Thursday, January 12, 2017

Ted TALK #3: “Due Diligence!”


Ted TALK: “Due Diligence!”

Dyplast’s ongoing survey of below-ambient insulation applications indicates that over 65% of projects fail to exercise reasonable due diligence that would have otherwise resulted in lower capital costs while achieving higher thermal efficiencies.

I’ve spoken on this before, particularly at Conferences, on Panels, and within Industry Magazines. Due diligence expresses the care that a reasonable person exercises to research, analyze, and prepare for a transaction, process, or strategy. 

My many esteemed colleagues will echo my personal astonishment regarding how many insulants are selected without the supplier even demonstrating compliance with applicable Codes and Standards such as ASTM, CINI, etc. - - measured by an independent third party - - not by an in-house lab, and not a product formulation different from the product delivered. And since insulants are meant to insulate over the long term, due diligence is also intended to ensure the life-cycle balance of cost versus performance is achieved.


It is increasingly incumbent on engineers, specifiers, asset owners, and stakeholders to be diligent regarding the facts, the relevance of the facts, and full disclosure of facts. A life-cycle costing of the insulation system is also warranted in the majority of applications.


Respectfully
Ted Berglund
President
Dyplast Products

Wednesday, December 7, 2016

Ted TALK #2: “Honest Talk”



Ted TALK: "Honest Talk"

Okay, yes, a rather direct statement - - yet more-so a promise from Dyplast to customers and others in the industry. You’re receiving this message either because we’ve either worked together in the past, may work together in the future, or you have somehow followed us. In my first Ted TALK I jumped into the fray with the “Mechanical Insulation Value Chain” blog assuming you knew me and understood the context. The responses were positive but I wanted to step back and explain where I was coming from. 


Dyplast is entrenched in Mechanical (pipe/equipment) Insulation and Panel Insulation, indeed mostly for temperatures less than ambient, yet we’re also innovative in Composite and Core Foams. Within those product/market contexts, you can expect to hear honest comments about issues and trends that affect us.  To the extent that you disagree with me, I welcome your input. In this highly technical and complex industry, I have heard that you feel many suppliers misrepresent or do-not-disclose the real story which is why I will be offering you my honest opinion to help inform you.

In my next Ted TALK I’ll get back to meat-and-potatoes issues.

Approaching the Holiday season, everyone at Dyplast extends to you our best wishes!


Respectfully
Ted Berglund
President
Dyplast Products

Monday, October 31, 2016

Dyplast Products attending NIA's 2016 Fall Summit

Dyplast Products invites you to join us November 2-3 2016 at the NIA Fall Summit, at the Hilton Crystal City in Arlington Virginia. NIA’s Fall Summit is an annual 2-day members-only event that includes topical speakers, open committee meetings, tailored industry sessions, and networking opportunities to develop new business relationships. Designed to “Educate, Engage, and Elevate,” the goal of the Fall Summit meeting is to provide actionable content for attendees that companies can implement immediately to improve their businesses.

Joe Hughes (VP Sales & Marketing ) will be representing Dyplast to discuss the latest in polyurethanes technology used in the Dyplast Products family of polyisocyanurate rigid core foam insulation. The ISO-C1 products are an integral part of the design and successful operation of refrigeration systems and mechanical pipe insulation systems.

We look forward to participating and seeing you at this important event!