Dyplast Products Revamps Blog with new Style and Content

New Style...Same Industry Expertise

Dyplast consistently challenges the insulation industry with thought provoking articles, consistent and accurate data; and our manufacturing capacities and precision quality control make us one of the industry’s finest suppliers of Mechanical Pipe Insulation and Composite Foam Cores!

Meet the Experts at Dyplast Products and Challenge Us

Dyplast Sales Staff are Insulation Industry Subject Matter Experts. Call us today and put them to work for you!

Contact Us Today!

CLICK BELOW TO SEE EACH OF OUR PRODUCT LINES

ISO-C1 Polyiso                            ISO-HT Polyiso

                    Dyplast EPSD            Composite Foam CoresF

Contact one of our Staff Today!

(305) 921-0100

(800) 433-5551

info@dyplast.com

Qwik Guide for Petroleum, Chemical, and Pharmaceutical Low Temperature Insulation

Petro/Chem/Pharma plants are increasingly focused design and management of their lower temperature and cryogenic processes, not only to reduce energy loss but to improve process efficiencies - - and in the case of chemical and pharmaceutical to enable more selective and specialized chemical reactions at very low temperatures. This Qwik Guide considers the role of the insulation in these efforts since it has a material impact not only on life-cycle cost, but also on life-cycle-performance and risk.

Qwik Guide for Petroleum, Chemical, and Pharmaceutical Low Temperature Insulation

Re-Launch: Dyplast CEO pens "Open Letter to the Mechanical Insulation Industry"

Dyplast sent out a media announcement yesterday and a minor “units error” in our attachment was identified by our friends. Dyplast herein restates its message (now with an updated attachment)  that Recently Dyplast was made aware of several marketing documents from Pittsburgh Corning comparing FOAMGLAS® to PIR/PUR systems. These include "Truth in Performance", "Polyisocyanurate Foam versus FOAMGLAS Insulation", and "FOAMGLAS Response to Dyplast Customer Bulletin dated 6/2010". These marketing pieces are misleading and contain numerous false statements. While Dyplast will not waste your time going through every misrepresentation, this letter will address key areas in order to let you decide if there is any reason to give credit to the Pittsburgh Corning claims. Additionally, Dyplast will outline key facts about Dyplast ISO-C1® products because real data and actual infield performance are a better basis to evaluate products.

---

Open Letter to the Mechanical Insulation Industry.PDF

Dyplast Products receives Theodore H. Brodie Distinguished Safety Award for 2017

The National Insulation Association (NIA) announced Dyplast Products as the recipient of its 2017 Theodore H. Brodie Distinguished (Platinum) Safety Award at its 63rd Annual Convention in Orlando, Florida. This will be the 5th consecutive year that Dyplast has been honored with  the Platinum award, NIA's highest level.

Previously, Dyplast received its first Silver Award in 2012 and from 2013-16 received 4 Platinum Awards. Congratulations to the entire Dyplast Team on this outstanding achievement!

Dyplast releases new Polyiso vs. XPS Technical Bulletin

Dyplast released its latest Technical Bulletin 0418 which is an update to the 0214 Bulletin on Polyiso versus XPS in low temperature pipe insulation applications. Whereas the previous version was focused primarily on examining the cost of insulation systems versus energy savings and long-term performance of polyisocyanurate (polyiso or PIR) and extruded polystyrene (XPS) insulants in refrigeration and chilled water applications, this more recent Bulletin revision is more-so focused on the misinformation and/or lack of full disclosure so prevalent in the marketplace. Dyplast aggressively advocates for:

• honest presentation of physical properties and pertinent information, yet also
• full-disclosure, complemented with
• third-party verification and audit of physical properties and the quality process.

Polyiso versus XPS

Dyplast Announces Additional ISO-C1® and ISO-CF® Fabrication Capabilities

Dyplast Products manufactures high-quality rigid polyisocyanurate insulation bunstock for mechanical insulation, sheet, and foam cores offering many superior properties.

Dyplast manufactures ISO-C1®, and ISO-CF® bunstock on a continuous production process yielding 2.0, 2.5, 3.0, 4.0, and 6.0 lb/ft3 densities. Today Dyplast announces that we have installed a SmartShop® CNC router to execute preformed routed cuts on our polyisocyanurate sheet and foam core family of products. Dyplast has extensive sheet fabrication capacity, and now has the capability to produce preformed routed cuts for prototypes and production pieces to respond to increasingly complex customer requirements. Our experienced staff can fabricate the large bunstock into sheets and shapes utilizing computer-aided-design (CAD). 

Dyplast's production capacities allow us to meet market demands for large or small volume projects.

Dyplast invites you to discuss your projects and needs. Please contact Dyplast's Sr. Account Managers at (800) 433-5551 or e-mail us at info@dyplast.com or via our web-sites.

"Leading Edge Technology for Insulation & Foam Cores"

Please visit Dyplast's web-sites 

www.dyplast.com and www.dyplastcomposites.com

.

Dyplast Announces Additional EPS Fabrication Capabilities

Dyplast Products manufactures high-quality rigid expanded polystyrene (EPS) foam blocks using a molding process at densities of 1.0, 1.25, 1.5, and 2.0 lb/ft3. Today we announce that we have completed installing additional fabrication capacity to better serve increased demand and to offer more options for complex customer requirements. Our experienced staff can fabricate the EPS blocks into sheets and shapes utilizing computer-aided-design (CAD).

Dyplast EPS insulation is light-weight and resilient, offering many unique properties. Dyplast's production capacities allow us to meet market demands for large or small volume projects.

Dyplast EPS invites you to discuss your projects and needs. Please contact Robert Sanchinel Dyplast's Sr. Account Manager at (800) 433-5551 or e-mail rsanchinel@dyplast.com

Please visit Dyplast's web-sites 

www.dyplast.com and www.dyplastcomposites.com

Dyplast Products Redesigned Web-Site v.1

Dyplast Products, LLC  announces today that we have re-designed the Dyplast web-site, www.dyplast.com. The redesigned web-site has a cleaner design with stream lined navigation and readability. It can be viewed on desktops, laptops, as well as being mobile friendly.

The web-site still includes all the previous technical information about our family of products including our polyisocyanurate foams: ISO-C1®, ISO-HT®, and Dyplast® EPS.  The new information includes ISO-C1® 2.5# cryogenic test results meeting the international standard CINI-2013. Dyplast continually update the web-site

In addition to all our technical data, Technical Bulletins, Qwik Guides, and application information, Dyplast has added new sections with our published articles and blogs along with a revised Career page. The web-site features a link to our new Foam Cores web-site with specific information on our ISO-CF®.

Dyplast continues to provide "leading technology for low temperature insulation application and core foams".

Dyplast invites you the fabricator, installer, contractor, engineer, estimator, or end user to study the new Dyplast web-site whether you are a frequent user or a first-time user looking to increase your knowledge of insulation.   

Please visit Dyplast's web-site www.dyplast.com

Dyplast Products receives Florida Sterling Manufacturing Business Excellence Award

On June 2, Dyplast Products, LLC received the “First Runner Up” award at Governor's Sterling Awards Banquet in Orlando. The Florida Governor’s Sterling Award is for Performance Excellence. The awards are presented annually by the Governor to both private and public companies that are high performing, role-model organizations demonstrating superior management approaches and role model results.

The finalist and winners were selected from among 28 award finalists representing 120 Florida manufacturers nominated in 6 categories. Dyplast received statewide recognition in the “up to 100 employees” category.

Dyplast personnel attending were:  Ted Berglund President and CEO, Vincente Fuster, Sr. VP Operations and Finance, and Yamilet Ramirez, Asst VP and HR Manager. Ted stated he was pleased with the award and congratulated the Dyplast team for their commitment to excellence.

Dyplast awarded Manufacturer of the Year by South Florida Manufacturers Association

Dyplast was awarded the Manufacturer of the Year by the South Florida Manufacturers Association at the 38th Annual Recognition of Excellence Banquet dinner held on March 23rd at The JA World Huizenga Center at Broward College in Coconut Creek, Florida. Ted Berglund, Vincent Fuster, Ramon Betancourt and Yamilet Ramirez represented Dyplast at the event.

SFMA celebrates excellence in the manufacturing sector by recognizing both individuals and companies, who through a very demanding ranking process, demonstrate distinction in the categories of Employee of the Year and Manufacturer of the Year recipients. Dyplast was honored within its class (41 - 80 Employees) taking the winning spot of becoming the Best Manufacturer of the Year.  This recognition by the SFMA put Dyplast in the unique position of advancing to the state level competition - Florida Sterling Manufacturing Business Excellence (SMBE) where once again through a rigorous ranking process Dyplast will be evaluated and considered for an award.  The SMBE award ceremony will take place in Orlando in June.

See Press Release by SFMA

Dyplast Products attending 2016 Polyurethanes Technical Conference

Dyplast Products is proud to announce we will be attending the 2016 Polyurethanes Technical Conference at the Hilton Baltimore - Baltimore, Maryland from September 26 – 28 2016.

Fostering both technical and professional development, the Polyurethanes Technical Conference is the premier destination to learn about the latest in polyurethanes technology used in the Dyplast Products family of ISO-C1® polyiso insulation. The ISO-C1 products are an integral part of the design and successful operation of refrigeration systems and mechanical pipe insulation systems.

We look forward to participating and seeing you at this important event!

Dyplast Products attending the Thermal Insulation Association of Canada’s 2016

Dyplast Products will be attending the Thermal Insulation Association of Canada’s (TIAC) 2016 Annual Conference at Delta Bessborough Hotel Saskatoon, Saskatchewan from September 17 – 20, 2016.

The 2016 Conference program will feature timely presentations by industry experts and leaders, business meetings where you can engage in sector-specific discussions and networking opportunities to connect with friends new and old.

The Thermal Insulation Association of Canada is the national industry association for contractors, distributors and manufacturers of commercial, industrial and institutional thermal insulation, asbestos abatement and firestop. Dyplast Products has been an active supporter of TIAC for many years and is eager to be a part of this Annual Conference.

Claude Hartdegen will be representing Dyplast to discuss the ISO-C1® ASTM C591 and CINI 2014 results and other topics related to polyisocyanurate insulation. We look forward to seeing you there!

Dyplast Products releases Qwik Guides for Polyisocyanurate and Extruded Polystyrene

Dyplast uses Qwik Guides to condense into one page the information otherwise contained in DataSheets and longer technical materials. Dyplast’s latest release is a Qwik Guide for Polyisocyanurate and Extruded Polystyrene (XPS). 

Other Qwik Guides are available at www.dyplastproducts. com/resources/qwik-guides. The latest Qwik Guide offers information on comparisons between polyisocyanurate (PIR) and XPS. Click on the link below to view the Qwik Guide on XPS or to view the other Qwik Guides Dyplast has released to date.

Qwik Guide: Polyisocyanurate and Extruded Polystyrene

 

Dyplast Website Qwik Guides Page

 

If you have any questions please contact our professional Sales Team at sales@dyplast.com

Dyplast “Mission Critical” Article in LNG Industry Magazine

 

Dyplast examines the role of the insulation system in optimizing value in LNG Facilities!

 

Dyplast CEO Ted Berglund and VP of Sales and Marketing Joe Hughes just published an article in the “July/August” issue of LNG Industry magazine which examines the importance of due diligence when choosing a cryogenic insulation system that will optimize value in LNG Facilities. The selection of the optimal insulant and the appropriate insulation system is “Mission Critical”! Engineers, specifiers, owners, and stakeholders are becoming increasingly vigilant regarding what information is relevant, what information is factual, is there full disclosure, and is data validated by an independent laboratory? These concerns dictate a second or even third look at optimizing lifecycle risk and performance – steps beyond lifecycle cost. This article considers the role of the insulant and the insulation system in these efforts since they have a substantial impact on lifecycle cost (material/labor capital cost), long term operation and maintenance costs, and on lifecycle performance and risk.
   

Dyplast’s ISO-C1® 2.5 # polyisocyanurate foam clearly supports stakeholder objectives and concerns since it meets or exceeds not only the latest requirements of ASTM C591-15 but also CINI-2014 specifications; and ISO-C1® has a long history of success at LNG facilities globally.

 

Ø  Click below for the referenced LNG Industry Magazine July 2015 Article

 

Ø  Click here for the associated Elba Island Case Study

Ø  Call us at (305) 921-0100 and ask for Joe Hughes for additional background

 

 

 

 

Dyplast attending 2015 Polyurethanes Technical Conference

2015 Polyurethanes Technical Conference

October 5-7, 2015

Gaylord Palms Resort & Convention Center

Kissimmee, Florida

Dyplast Products is proud to announce we will be attending the 2015 Polyurethanes Technical Conference October 5-7, 2015 at the Gaylord Palms Resort and Convention Center in Kissimmee, Florida.

 

Fostering both technical and professional development, the Polyurethanes Technical Conference is the premier destination to learn about the latest in polyurethanes technology used in the Dyplast Products family of ISO-C1® polyiso insulation. The ISO-C1 products are an integral part of the design and successful operation of refrigeration systems and mechanical pipe insulation systems.

 

We look forward to participating and seeing you at this important event!

Dyplast Products attending 2015 TIAC Annual Conference

Dyplast Products is attending the Thermal Insulation Association of Canada’s 2015 Annual Conference at Delta Prince Edward Hotel in Charlottetown, Prince Edward Island from August 13-19

The Thermal Insulation Association of Canada is the national industry association for contractors, distributors and manufacturers of commercial, industrial and institutional thermal insulation, asbestos abatement and firestop. Recently Dyplast achieved ULC S102 25/50 at 1.5 inches for ISO-C1 2#. This is a significant achievement and demonstrates the superior quality of Dyplast Products manufacturing process and the products that are available for the Canadian Market. Dyplast Products has been an active supporter of TIAC for many years and is eager to be a part of this Annual Conference.

UPDATED CUSTOMER BULLETIN 05-15 A COMPARISON OF ISO-C1® and HT-300 POLYISOCYANURATE INSULATION

Dyplast Products in it's ongoing effort to provide timely and accurate information about polyisocyanurate rigid foam insulation within the industry has updated it's Customer Bulletin 05-15 "A Comparison of ISO-C1 and HT-300 Polyisocyanurate Insulation".

 

This updated Customer Bulletin is part of a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Marketing literature on the internet and in printed media address the physical and performance characteristics of competing polyisocyanurate rigid foam insulations fabricated from bunstock. As is often the case, some literature can be misleading and/or in some cases there may not be sufficient information to credibly compare products. This Customer Bulletin provides factual, clarifying information which should allow for an objective comparison of Dyplast's ISO-C1® with HiTherm's HT-300 (each 2 lb/ft3 density).

Customer Bulletin 05-15

 

Please contact Dyplast personnel or visit our web-site www.dyplast.com for complete information.

Announcing: CINI 2014 Results and Reader Action

 

May 26 2015

Dyplast Products, LLC’s ISO-C1® 2.5 fully complies with CINI 2014 (Committee INdustrial Insulation) in all aspects (material, mechanical, and chemical properties, and combustibility) achieving or exceeding properties for LNG and cryogenic applications.

Dyplast Products, LLC used certified independent laboratories to complete all the testing of CINI 2014 (Committee INdustrial Insulation) for the ISO-C1 2.5, polyisocyanurate rigid insulation foam use in LNG and cryogenic applications.
We are pleased to announce that Dyplast meets or exceeds all material, mechanical, and chemical properties, and combustibility testing.
The ISO-C1 2.5 (2.5 pcf) passed all tests and exceeded:

Ø  Apparent thermal conductivity/ mean temperature of measurements

Ø  Compressive strength

Ø  Tensile strength

Ø  Modulus strength

Ø  Cryogenic Thermal Stress Resistance (CTSR) factor value of 5.8 (versus a minimum of 1.5).

The ISO-C1 2.5 is manufactured in Miami, FL and is distributed internationally.

The ISO-C1 2.5 also meets or exceed the ASTM C591-13 specifications.

Please contact Dyplast personnel or visit our web-site www.dyplast.com for complete information.

Dyplast Products attending the upcoming 58th Annual Spring Convention of MICA

58th Annual Spring Convention of MICA June 22 - 25, 2015 Blue Harbor Resort, Sheboygan, WI

Dyplast Products is pleased to be attending the upcoming 58th Annual Spring Convention of MICA (Midwest Insulation Contractors Association) at the Blue Harbor Resort, Sheboygan, WI June 22nd thru the 25th. A highlight of the conference will be MICA presenting their 10th annual “Best Practices in Safety” Awards of which Dyplast is proudly participating.

Since 2007, Dyplast Products’ has been a member of this professional and dynamic association of commercial and industrial insulation contractors. We look forward to actively participating in this conference and meeting current as well as new industry associates and clients.

 

Dyplast Products attending ASTM Committee C16 Meeting

 

 

Dyplast Products will be attending the ASTM Committee C16 Meeting on Thermal Insulation at its bi-annual meeting at the Marriott Anaheim.

 

                                                 April 26-29, 2015

                                               Anaheim, California

 ASTM represents both small and large mechanical, commercial, industrial and asbestos abatement contractors as well as various suppliers and distributors of products and services to the industry. The Annual Book of ASTM Standards, Volume 04.06 C16 continues to play a preeminent role in all aspects important to the industry of thermal insulation.

 

Dyplast has been supporting ASTM over many years, and is eager to again be part of this valuable Committee Meeting.

 

 

Link to ASTM Committee Meeting Web page