Dyplast Products Revamps Blog with new Style and Content

New Style...Same Industry Expertise

Dyplast consistently challenges the insulation industry with thought provoking articles, consistent and accurate data; and our manufacturing capacities and precision quality control make us one of the industry’s finest suppliers of Mechanical Pipe Insulation and Composite Foam Cores!

Meet the Experts at Dyplast Products and Challenge Us

Dyplast Sales Staff are Insulation Industry Subject Matter Experts. Call us today and put them to work for you!

Contact Us Today!

CLICK BELOW TO SEE EACH OF OUR PRODUCT LINES

ISO-C1 Polyiso                            ISO-HT Polyiso

                    Dyplast EPSD            Composite Foam CoresF

Contact one of our Staff Today!

(305) 921-0100

(800) 433-5551

info@dyplast.com

Dyplast Products Releases - QWIK GUIDE: GeoFoam (Geo-Technical EPS)

Dyplast Products recently issued another a one-page Qwik Guide on Dyplast® EPS GeoFoam. What is Geofoam? It is a large expanded polystyrene (EPS) rigid foam block, typically used as a light-weight/high-strength structural replacement for soil in geo-technical projects as shown in our case study entitled GeoFoam Project: Sharpes Ferry Bridge or as structural alternatives in applications such as stadium seating and swimming pool foundations in Florida's high-rise hotels and residences.  Dyplast GeoFoam is approximately 1% of the weight of most sandy and/or average moisture soils, and is particularly advantageous in applications where proper soil alternatives. 

This Qwik Guide can be found on our web-site www.dyplast.com under the resources drop down.

Qwik Guide for Petroleum, Chemical, and Pharmaceutical Low Temperature Insulation

Petro/Chem/Pharma plants are increasingly focused design and management of their lower temperature and cryogenic processes, not only to reduce energy loss but to improve process efficiencies - - and in the case of chemical and pharmaceutical to enable more selective and specialized chemical reactions at very low temperatures. This Qwik Guide considers the role of the insulation in these efforts since it has a material impact not only on life-cycle cost, but also on life-cycle-performance and risk.

Qwik Guide for Petroleum, Chemical, and Pharmaceutical Low Temperature Insulation

Dyplast releases new Polyiso vs. XPS Technical Bulletin

Dyplast released its latest Technical Bulletin 0418 which is an update to the 0214 Bulletin on Polyiso versus XPS in low temperature pipe insulation applications. Whereas the previous version was focused primarily on examining the cost of insulation systems versus energy savings and long-term performance of polyisocyanurate (polyiso or PIR) and extruded polystyrene (XPS) insulants in refrigeration and chilled water applications, this more recent Bulletin revision is more-so focused on the misinformation and/or lack of full disclosure so prevalent in the marketplace. Dyplast aggressively advocates for:

• honest presentation of physical properties and pertinent information, yet also
• full-disclosure, complemented with
• third-party verification and audit of physical properties and the quality process.

Polyiso versus XPS

Dyplast to suspend operations in advance of Hurricane Irma

Dyplast Products, LLC of Miami FL will be impacted by hurricane IRMA and as such, Dyplast has activated its Hurricane Preparation Plan.

Dyplast will suspend operations Friday night September 8, 2017 and resume once the storm’s impact is fully assessed including the region’s ability to recover.

We thank all our Miami based employees for their shut down efforts. They are in our thoughts and prayers.

Dyplast personnel will communicate with you as soon as our operations resume. If you have any questions please contact your Account Manager or myself.

Thank you for your patience and support during this uncertain time.

Joe Hughes

VP Sales and Marketing

Mobile: 305-904-4059

Dyplast Products Robert Sanchinel promoted Sr. Account Manager

Dyplast Products, LLC is pleased to announce that on May 10, 2017 Robert Sanchinel was promoted to Sr. Account Manager. Robert became a Dyplast (Apache) employee 25 years ago starting in the EPS production department. He became the lead CAD/CAM operator and was promoted to an EPS sales representative. In 2012, he expanded his EPS sales responsibilities by adding ISO-C1® to his portfolio as the Southeast and Caribbean Account Manager.

As a Sr. Account Manager, Robert is responsible for managing and expanding all the Dyplast EPS sales including developing new EPS business opportunities. He will continue to manage the ISO-C1 sales in Florida and the Caribbean.

The Dyplast Team wishes Robert continued success in his new position.

Dyplast Products exhibiting at 2016 CAMX – Composites and Advanced Materials Expo

Dyplast Products is proud to announce we will be exhibiting at the 2016 CAMX – Composites and Advanced Materials Expo at the Anaheim Convention Center – Anaheim, California from September 26 – 29 2016.

CAMX is the largest, most comprehensive composites and advanced materials event for products, solutions, networking, and advanced industry thinking. Joe Hughes (VP Sales & Marketing) and Tom McGettigan (Sr. Account Manager) will be talking about the latest in polyurethanes technology used in the Dyplast Products family of polyisocyanurate rigid core foam insulation in the EXPO Hall at our exhibit (J92).

We look forward to participating and seeing you at this important event!

Dyplast Products receives Mica’s Platinum Level “Safety Best Practices Award”

At Mica’s 58^thAnnual Spring Convention, Dyplast Products was presented the Platinum Level “Safety Best Practices Award”. Tom McGettigan shown in the photo received the award on Dyplast’s behalf. Tom said, “ It is with great pride and pleasure that I accept this prestigious safety award on behalf of Dyplast Products”.

Also shown below is a photo of Ted Berglund, President and CEO presenting the MICA Platinum award to Ramon Betancourt, Safety Manager.

Safety is recognized by MICA as a vital part of the insulation industry and a key success factor in any organization. Dyplast Products was recognized at the opening breakfast meeting for members and spouses. MICA also set aside a “Safety Roundtable Discussion” session at which the participating companies shared their “Safety Best Practices” with the general membership.

The grading process for the “Best Practices in Safety” Award Program uses a grading system that recognizes each applicant’s achievement in developing a quality safety program. The award levels are: Platinum: 95 to 100% Gold: 88 to 94% Silver: 80 to 87% Bronze: 70 to 79%.

This is the 5^th industry Safety award that Dyplast has received since 2012. The National Insulation Association has awarded Dyplast 4 times previously for their stellar Safety Perormance. 

Dyplast attending ESICA Spring Conference

Dyplast will be attending the Eastern States Insulation Contractors Association Conference at the Williamsburg Lodge in Williamsburg, Virginia from May 4-6 2016.

ESICA represents both small and large mechanical, commercial, industrial and asbestos abatement contractors as well as various suppliers and distributors of products and services to the industry. Dyplast has been supporting ESICA over many years, and is eager to again be part of this valuable Conference.

The Dyplast family of ISO-C1® polyiso insulation mechanical pipe insulation system is an integral part of the design and successful operation of mechanical pipe insulation and refrigeration systems. ISO-C1® has been successfully used for many years as mechanical pipe insulation and is a proven economic insulation technology.

Dyplast New Senior Account manager, Tom McGettigan will be attending this year. He will be looking forward to meeting all those attending this important event!

Dyplast exhibiting at the 2016 IIAR Industrial Refrigeration Conference & Exhibition

The 2016 IIAR Industrial Refrigeration Conference & Exhibition scheduled March 20-23 2016 at the Caribe Royale All-Suite Hotel and Convention Center in Orlando, Florida offers an unrivaled opportunity for companies to showcase their latest products, services innovations and technologies and for attendees to meet, network and learn from others who are interested in the same professional opportunities.

 “IIAR provides advocacy, education, and standards for the benefit of the global community in the safe and sustainable design, installation and operation of ammonia and other natural refrigerant systems.” Dyplast exhibits at the IIAR Exhibition because our ISO-C1® family of polyiso insulation mechanical pipe insulation system is an integral part of the design and successful operation of the refrigeration systems. ISO-C1® has been successfully used for many years as mechanical pipe insulationand is a proven economic insulation technology. Exhibiting at IIAR allows Dyplast personnel to discuss first hand with the engineers, designers, and owners attending, the economic value that ISO-C1® imparts to their operations. 

Come visit Dyplast at (Booth #302) where our industry experts will be ready to provide more information on full product range of polyisocyanurate insulation for both mechanical insulation and architectural panel applications.

We look forward to seeing you there!

Dyplast “Mission Critical” Article in LNG Industry Magazine

 

Dyplast examines the role of the insulation system in optimizing value in LNG Facilities!

 

Dyplast CEO Ted Berglund and VP of Sales and Marketing Joe Hughes just published an article in the “July/August” issue of LNG Industry magazine which examines the importance of due diligence when choosing a cryogenic insulation system that will optimize value in LNG Facilities. The selection of the optimal insulant and the appropriate insulation system is “Mission Critical”! Engineers, specifiers, owners, and stakeholders are becoming increasingly vigilant regarding what information is relevant, what information is factual, is there full disclosure, and is data validated by an independent laboratory? These concerns dictate a second or even third look at optimizing lifecycle risk and performance – steps beyond lifecycle cost. This article considers the role of the insulant and the insulation system in these efforts since they have a substantial impact on lifecycle cost (material/labor capital cost), long term operation and maintenance costs, and on lifecycle performance and risk.
   

Dyplast’s ISO-C1® 2.5 # polyisocyanurate foam clearly supports stakeholder objectives and concerns since it meets or exceeds not only the latest requirements of ASTM C591-15 but also CINI-2014 specifications; and ISO-C1® has a long history of success at LNG facilities globally.

 

Ø  Click below for the referenced LNG Industry Magazine July 2015 Article

 

Ø  Click here for the associated Elba Island Case Study

Ø  Call us at (305) 921-0100 and ask for Joe Hughes for additional background